Preventative Maintenance

Check out the list of required maintenance tasks to be performed on a regular basis. All tasks are quick and will help to avoid larger issues in the future.

• Wipe down all bikes using mild soap and water or a mild cleaner
• Do not use products with ammonium chloride to clean the bikes, as they will cause the glue to come off

• Clean and lubricate sliding tubes (use mild soap/water & silicone lubricant)
• Inspect pedals- Fraying straps, broken bindings, tightness
• Visually inspect all hardware components
• Check and adjust FitLocs as needed

• Check crank bolt torque (Torque to 52-57 Nm or 38-42 lb – ft)
• Check power meter battery levels and change out batteries as needed
• Check console battery levels (iff equipped) and change out batteries as needed
• Check and update Firmware as needed for for both power meter and console (if equipped)

• For maximum performance & safety, replace the pedals every year
• Inspect bottom brackets
• Check and replace power meter batteries